<?xml version="1.0" encoding="UTF-8"?><rss version="0.92">
<channel>
	<title>Battery Chargers</title>
	<link>http://ebatterychargers.com</link>
	<description></description>
	<lastBuildDate>Tue, 27 Jul 2010 11:48:32 +0000</lastBuildDate>
	<docs>http://backend.userland.com/rss092</docs>
	<language>en</language>
	<!-- generator="WordPress/3.0" -->

	<item>
		<title>Battery Voltage Splitter</title>
		<description><![CDATA[This battery voltage splitter is used where a common is needed; in many systems is to obtain positive and negative supplies from a single battery. Where current requirements are small, the circuit shown is a simple solution. It provides symmetrical +&#038;- output voltages, both equal to one half the input voltage. The output voltages are [...]]]></description>
		<link>http://ebatterychargers.com/battery-voltage-splitter-260.html</link>
			</item>
	<item>
		<title>12V Battery Auto Charger with 741</title>
		<description><![CDATA[This 12 Volt Battery Auto Charger circuit will quickly and easily charge most any lead acid battery. When the battery is fully charged, the circuit Relay switches off and lights a LED. car battery charger circuit diagram auto battery charger PCB]]></description>
		<link>http://ebatterychargers.com/12v-battery-auto-charger-with-741-247.html</link>
			</item>
	<item>
		<title>Low Cost Battery Charger</title>
		<description><![CDATA[Here is the low cost universal charger circuit diagram for NiCD &#8211; NiMH batteries. This battery charger circuit is ideal for car use. It has ability to transform a mains adapter in to a charger . This one can be used to charge cellular phone, toys, portables, video batteries, MP3 players, &#8230; and has selectable [...]]]></description>
		<link>http://ebatterychargers.com/low-cost-battery-charger-237.html</link>
			</item>
	<item>
		<title>Battery Charger with Constant Current</title>
		<description><![CDATA[In this circuit, the battery is charged with a constant current that is generally one-tenth of the battery capacity in ampere-hours. This constant-current battery charger circuit is divided into three sections: constant current source, overcharge protection and deep-discharge protection sections. This battery charger has the following features: It can charge 6V, 9V and 12V batteries. [...]]]></description>
		<link>http://ebatterychargers.com/battery-charger-with-constant-current-231.html</link>
			</item>
	<item>
		<title>NiCd Battery Charger with Reverse Polarity Protection</title>
		<description><![CDATA[This NiCd battery Charger can charge up to 7 NiCd batteries connected in series. This number can be increased if the power supply is increased with 1.65V for each supplementary battery. If T2 is mounted on a proper heatsink, the input voltage can be increased at a maximum of 25V. Unlike most of comercial NiCd [...]]]></description>
		<link>http://ebatterychargers.com/nicd-battery-charger-with-reverse-polarity-protection-203.html</link>
			</item>
	<item>
		<title>NiCd Charger for 9V Battery</title>
		<description><![CDATA[This automatic NiCd charger for 9V NiCd batteries is using 555 timer properties and is very easy to build. Why is an automatic 9 volts NiCd battery charger? Because you can leave the battery for charging as much as you like: it will be always completely charged and ready for use when is needed. It [...]]]></description>
		<link>http://ebatterychargers.com/nicd-charger-for-9v-battery-191.html</link>
			</item>
	<item>
		<title>Button Cell Batteries Charger</title>
		<description><![CDATA[Button batteries or coin cell batteries charger circuit is simple to build, must be powered up from a 9V power supply circuit and can charge up to 5 button cell batteries. D1 is a protection diode while R1 and C1 decouple the power live of the IC1 U2401B. D3 is for protecting the batteries in [...]]]></description>
		<link>http://ebatterychargers.com/button-cell-batteries-charger-181.html</link>
			</item>
	<item>
		<title>NiMH Battery Discharger &#8211; NiCad discharger Circuit</title>
		<description><![CDATA[Use this NiMH battery discharger or NiCad discharger circuit when you need to discharge a battery fast and safe. This circuit is suitable for NiMH or NiCad batteries and is cheap and easy to build but the elements must be corelated with the number of battery elements. When D2 is on, the battery is discharging [...]]]></description>
		<link>http://ebatterychargers.com/nimh-battery-discharger-nicad-discharger-circuit-175.html</link>
			</item>
	<item>
		<title>Battery Disconnect Switch</title>
		<description><![CDATA[This battery disconnect switch or cut-off (breaker circuit) is designed to automatically turn off any battery operated device when its user has forgotten to switch it off within a preset period of time and so it will preserve the battery&#8217;s life. How does the the battery cut-off switch work? When the device connected to this [...]]]></description>
		<link>http://ebatterychargers.com/battery-disconnect-switch-circuit-171.html</link>
			</item>
	<item>
		<title>Battery Monitor Circuit</title>
		<description><![CDATA[This battery monitor circuit is used for monitoring the battery&#8217;s condition through the three LEDs. The threshold level of the red LED is controlled by potentiometer 2, yellow by P1 and green by P3. The setting of each pot is quite critical and must be adjusted repeatedly until the correct threshold level is reached. Finnaly, [...]]]></description>
		<link>http://ebatterychargers.com/battery-monitor-circuit-164.html</link>
			</item>
</channel>
</rss>
